This litigation arose from a challenge to an administrative determination by the International Trade Administration, United States Department of Commerce ("Commerce" or the "Department"), that certain imported appliance door handles fall within the scope of antidumping and countervailing duty orders on certain aluminum extrusions from the People's Republic of China.
Before the court is the mandate issued by the United States Court of Appeals for the Federal Circuit ("Court of Appeals") in Meridian Prods. v. United States , 890 F.3d 1272 (Fed. Cir. 2018) (" Meridian III "). CAFC Mandate in Appeal # 16-2657 (June 28, 2018), ECF No. 82. Meridian III reversed the judgment entered by the court in *1353Meridian Prods. v. United States , 40 CIT ----, 180 F.Supp.3d 1283 (2016) (" Meridian II ") and remanded the case to the Court of International Trade for further proceedings. As directed by the Court of Appeals, the court issues this Opinion and Order to instruct Commerce on the issuance of a new administrative determination.
BACKGROUND I.
The background of this litigation is described in the prior opinions of the court and the opinion of the Court of Appeals. See Meridian Prods. v. United States , 39 CIT ----, ----, 125 F.Supp.3d 1306, 1308-09 (2015) (" Meridian I "); Meridian II , 40 CIT at ----, 180 F.Supp.3d at 1284-85 ; Meridian III , 890 F.3d at 1274-77. As discussed in those opinions, plaintiff Meridian Products LLC ("Meridian") submitted a request to Commerce for a scope ruling (the "Scope Ruling Request") on January 11, 2013 on three types of Meridian's imported kitchen appliance door handles, identified as "Type A," "Type B," and "Type C" handles. Meridian I , 39 CIT at ----, 125 F.Supp.3d at 1308 (citing Letter Requesting a Scope Ruling Regarding Kitchen Appliance Door Handles , C-570-968, A-570-967 (Jan. 11, 2013) (Admin. R. Doc. No. 1), ECF No. 39 App. 2 ("Scope Ruling Request ") ). Commerce issued its decision, the "Final Scope Ruling," on June 21, 2013, in which Commerce interpreted the scope of antidumping and countervailing duty orders (the "Orders")1 to include all three handle types. Final Scope Ruling on Meridian Kitchen Appliance Door Handles, C-570-968, A-570-967 (June 21, 2013) (Admin. R. Doc. No. 34), ECF No. 25-1 ("Final Scope Ruling "). The Type A and Type C handles, which are one-piece appliance door handles fabricated from a single aluminum extrusion, are no longer at issue in this litigation, Meridian I having sustained the Department's decisions in the Final Scope Ruling placing them within the scope of the Orders and Meridian III having been limited to the issue raised by the Type B handles. See Meridian III , 890 F.3d at 1276 (citing Meridian I , 39 CIT at ----, 125 F.Supp.3d at 1310-12 ). This Opinion and Order, therefore, addresses only the Type B handles, which do not consist entirely of an aluminum extrusion.
DISCUSSION II.
The court exercises jurisdiction under section 201 of the Customs Courts Act of 1980, 28 U.S.C. § 1581(c) (2012), which grants this Court jurisdiction over civil actions brought under section 516A(a)(2)(B)(vi) of the Tariff Act of 1930, as amended ("Tariff Act"), 19 U.S.C. § 1516a(a)(2)(B)(vi) (2012). In reviewing the contested scope ruling, the court must set aside "any determination, finding, or conclusion found ... to be unsupported by substantial evidence on the record, or otherwise not in accordance with law." Id. § 1516a(b)(1)(B)(i).
The "Type B" handle consists of a component fabricated from an aluminum extrusion, two plastic "end caps," and two screws, each of which attaches a plastic end cap to the aluminum component. See Final Scope Ruling 2. The Scope Ruling Request described a Type B handle as "an assembly of the middle handle bar extrusion piece plus two plastic injection-molded end caps at each end." Scope Ruling Request 2.
*1354In Meridian I , the court held that Type B handles were not described by the general scope language of the Orders, i.e., the scope language apart from the several specific exclusions. Meridian I , 39 CIT at ----, 125 F.Supp.3d at 1314, 1318. The court concluded that this language, under which an extrusion "is a shape or form produced by an extrusion process," did not, as a general matter, describe an assembly, opining that "no scope language in the Orders is so open-ended as to sweep into the scope all assembled goods that contain one or more aluminum extrusions as parts." Id. , 39 CIT at ----, 125 F.Supp.3d at 1312 (internal citations omitted). While the scope language contains a provision-the "subassemblies" provision-that places within the scope of the Orders aluminum extrusion components of some assembled articles, the subassemblies provision is expressly limited to "partially assembled merchandise." AD Order , 76 Fed. Reg. at 30,651 ; CVD Order , 76 Fed. Reg. at 30,654. The subassemblies provision states that, except for a good satisfying a specific exclusion (the "finished goods kit" exclusion),2 "[t]he scope includes the aluminum extrusion components that are attached (e.g. , by welding or fasteners) to form subassemblies, i.e. , partially assembled merchandise." AD Order , 76 Fed. Reg. at 30,651 ; CVD Order , 76 Fed. Reg. at 30,654. Under this "subassemblies" provision, the scope includes only the components within an assembly that are aluminum extrusions and thus "does not include the non-aluminum extrusion components of subassemblies." AD Order , 76 Fed. Reg. at 30,651 ; CVD Order , 76 Fed. Reg. at 30,654. Meridian I reasoned that this provision, in any event, did not describe the Type B handles, which the Scope Ruling Request stated were imported in assembled form and which Commerce found to be ready for use as is at the time of importation. Meridian I , 39 CIT at ----, 125 F.Supp.3d at 1313 (citing Final Scope Ruling 13).
Meridian I also opined that even were the Type B handles described by the general scope language, they would be placed outside the Orders by the "finished merchandise" exclusion. Id. , 39 CIT at ----, 125 F.Supp.3d at 1315-16. This exclusion applies to "finished merchandise containing aluminum extrusions as parts that are fully and permanently assembled and completed at the time of entry, such as finished windows with glass, doors with glass or vinyl, picture frames with glass pane and backing material, and solar panels." AD Order , 76 Fed. Reg. at 30,651 ; CVD Order , 76 Fed. Reg. at 30,654. Concluding that "the Department's determination ... is not based on reasonable interpretations of the general scope language and the finished merchandise exclusion," Meridian I remanded the Final Scope Ruling to Commerce for reconsideration. Meridian I , 39 CIT at ----, 125 F.Supp.3d at 1316, 1318.
*1355In its determination upon remand (the "Remand Redetermination"), Commerce asserted that its Final Scope Ruling was correct but, to comply with the court's decision in Meridian I , decided under protest that the Type B door handles were not included in the scope of the Orders. See Final Results of Redetermination Pursuant to Court Remand 1, 7-15 (Mar. 23, 2016) (Remand Admin. R. Doc. No. 4), ECF No. 67. The court affirmed the Department's determination that Type B handles were not included in the scope of the Orders. Meridian II , 40 CIT at ----, 180 F.Supp.3d at 1292. Following this decision, the Aluminum Extrusions Fair Trade Committee, defendant-intervenor in this case, appealed the judgment in Meridian II to the Court of Appeals.
In Meridian III , the Court of Appeals held that Meridian I was incorrect in concluding that the Type B handles were not described by the general scope language of the Orders. Meridian III , 890 F.3d at 1280-81. Meridian III ruled that Commerce permissibly decided that that the presence of the plastic end caps did not remove the Type B handles from the scope because Commerce acted reasonably, and in accord with record evidence, in concluding that these end caps were "fasteners." Meridian III , 890 F.3d at 1278-80. The Court of Appeals disagreed with the reasoning in Meridian I , 39 CIT at ----, 125 F.Supp.3d at 1313, that because the only scope language references to fasteners were in the subassemblies provision and the finished goods kit exclusion, Commerce had erred in disregarding the presence of the plastic end caps-on the ground that they were "fasteners"-in concluding that the Type B handles fell within the general scope language. The Court of Appeals opined that "[a]lthough a description of fasteners only appears in the 'finished goods kit' scope exclusion, the 'finished goods kit' language informs what may constitute a fastener in the context of the scope of the antidumping duty order as a whole." Id. at 1279. Meridian III also held that Commerce correctly had concluded in the Final Scope Ruling that the Type B handles were not excluded from the Orders by operation of the finished goods kit exclusion. Id. at 1281.
Although it reversed the holding in Meridian I as to the general scope language and, accordingly, vacated the judgment in Meridian II sustaining the Remand Redetermination, Meridian III did not hold that the Final Scope Ruling necessarily was in accordance with law. Specifically, the Court of Appeals did not sustain the Department's determination in the Final Scope Ruling that the finished merchandise exclusion did not apply to the Type B handles. As the Court of Appeals explained: "Because it is unclear from the record before Commerce and the statements made by Meridian's counsel in its reply brief and at oral argument before this court whether the Type B handles are fully and permanently assembled at the time of entry, we remand for Commerce to clarify this point." Id. at 1281-82 (footnote omitted).
The uncertainty the Court of Appeals identified as to whether the Type B handles are imported in assembled or unassembled form is understandable, in particular because the Final Scope Ruling itself can be read to be inconsistent on this issue. At one place in the document, Commerce stated that "the record is undisputed that the aluminum extrusion parts are not fully and permanently assembled with non-aluminum extrusion parts at the time of entry." Final Scope Ruling 13. Because Commerce made this statement in describing "Meridian's products," id. , it is possible, but not certain, that Commerce intended to describe not only the Types A and C handles, which consist entirely of a *1356fabricated aluminum extrusion, but also the Type B handles, which do not. Nevertheless, in the next paragraph Commerce, again referring to all three types, referred to "the fact that the products at issue are ready for use 'as is' at the time of importation." Id. This statement indicates that Commerce may have considered the Type B handles to have been imported in assembled form. The Court of Appeals was aware of this inconsistency as it appeared in the Final Scope Ruling, and elsewhere in the record, and expressly cited the statement in the Scope Ruling Request describing a Type B handle as "an assembly of the middle handle bar extrusion piece plus two plastic injection molded end caps at each end." Meridian III , 890 F.3d at 1281 n.8 (internal quotation marks and citation omitted).
The finding in the Final Scope Ruling that "the aluminum extrusion parts are not fully and permanently assembled with non-aluminum extrusion parts at the time of entry" was the reason Commerce gave for concluding that Meridian's handles, including the Type B handles, did not qualify for the finished merchandise exclusion. Final Scope Ruling 13. As the Court of Appeals implicitly recognized, this rationale cannot suffice if the Type B handles are fully and permanently assembled at the time of entry. Accordingly, Meridian III directed that "[i]f Commerce determines that the Type B handles are imported unassembled, then its original scope ruling controls and the inquiry ends" and that "[i]f Commerce determines the Type B handles are imported fully and permanently assembled, then we direct Commerce to address the question of whether the Type B handles are excluded from the scope of the antidumping and countervailing duty order as 'finished merchandise.' " Meridian III , 890 F.3d at 1282. The court addresses each of these possibilities below.
Should Commerce determine, based on substantial record evidence, that the Type B handles are entered in fully assembled form, then it must determine the applicability of the finished merchandise exclusion to the Type B handles in conformity with Meridian III (as that decision requires), but it also must do so in conformity with another decision of the Court of Appeals. A precedential decision, issued the day after Meridian III , interpreted the scope language of these same Orders in considering an appliance door handle that is highly similar to the Type B handle. In this subsequent opinion, the Court of Appeals held that "[w]ith respect to the exclusions from the Order's scope ... the exception for fasteners unambiguously applies only to the finished goods kit exclusion and not to the finished merchandise exclusion." Whirlpool Corp. v. United States , 890 F.3d 1302, 1311 (Fed. Cir. 2018) (" Whirlpool "); but see Whirlpool Corp. v. United States , 890 F.3d 1302, 1312-13 (Reyna, J. dissenting). Whirlpool did not overturn Meridian III , and the court accordingly interprets the two appellate decisions consistently. The fasteners exception in the finished goods kit exclusion "informs what may constitute a fastener in the context of the scope of the antidumping duty order as a whole" when the question is whether a good falls within the general scope language, i.e., the language apart from the specific exclusions. Meridian III , 890 F.3d at 1279. But the fasteners exception properly may not be construed to limit the applicability of the finished merchandise exclusion. Whirlpool , 890 F.3d at 1311. Therefore, in order to comply with the holding of Whirlpool , Commerce may not reach a determination that the finished merchandise exclusion is inapplicable on the ground that some or all of the non-aluminum-extrusion components of a Type B handle are considered by Commerce to fall within the meaning of *1357the term "fasteners." See Whirlpool , 890 F.3d at 1311 & n.4. Rather, as required by the express terms of the finished merchandise exclusion, Commerce must determine that the Type B handles are not within the scope of the Orders if they are found to be "finished merchandise containing aluminum extrusions as parts that are fully and permanently assembled and completed at the time of entry." AD Order , 76 Fed. Reg. at 30,651 ; CVD Order , 76 Fed. Reg. at 30,654.
Should Commerce validly determine, based on substantial record evidence, that the Type B handles are entered in unassembled form, the "original scope ruling controls." Meridian III , 890 F.3d at 1282. But in that event, another issue requires clarification. The court considers the Final Scope Ruling to be unclear as to whether Commerce would consider the entire unassembled Type B handle, or only the extruded aluminum center component, to be merchandise that is subject to the Orders. If Commerce concludes that the Type B handles are entered in unassembled form, it must clarify this point in its new redetermination and in doing so must address the scope language providing that "[t]he scope does not include the non-aluminum extrusion components of subassemblies or subject kits." AD Order , 76 Fed. Reg. at 30,651 ; CVD Order , 76 Fed. Reg. at 30,654.
The same lack of clarity would affect the Final Scope Ruling even if the Type B handle were considered to be in assembled form at the time of entry yet somehow still be considered by Commerce to be within the scope of the Orders. Should Commerce decide in its new redetermination that the Type B handle is in assembled form at the time of entry yet is still within the scope of the Orders, Commerce in explaining such a decision would need to clarify whether it is the extruded aluminum component or the entire handle that Commerce considers to fall within the scope.
CONCLUSION AND ORDER III.
In conformity with the mandate of the Court of Appeals, upon consideration of all papers and proceedings had herein, and upon due deliberation, it is hereby
ORDERED that the Department's March 2016 Remand Redetermination be, and hereby is, vacated; it is further
ORDERED that Commerce shall file, within ninety (90) days of the date of this Opinion and Order, a new determination upon remand ("Second Remand Redetermination") that determines, according to substantial evidence on the administrative record, whether Meridian's Type B handles are fully and permanently assembled at the time of entry; it is further
ORDERED that if Commerce determines, based on substantial evidence on the administrative record, that the Type B handles are fully and permanently assembled at the time of entry, it shall determine whether the Type B handles qualify for the "finished merchandise" exclusion, shall do so consistently with the holdings of Meridian III and Whirlpool , and shall provide an explanation of its reasoning; it is further
ORDERED that if Commerce determines, based on substantial evidence on the administrative record, that the Type B handles are in unassembled form at the time of entry, or if it otherwise determines that the Type B handles are within the scope of the Orders, it shall determine whether the Type B handles in the entirety, or only their extruded aluminum components, are within the scope of the Orders; it is further
ORDERED that plaintiff, plaintiff-intervenor, and defendant-intervenor may file comments on the Second Remand Redetermination within thirty (30) days from *1358the date on which the Second Remand Redetermination is filed; and it is further
ORDERED that defendant may file a response to the comments within fifteen (15) days from the date on which the last comment is filed.